Radians

Radians SV8 Standard Type R Class 2 Safety Vest is a standard Class 2 safety vest with two horizontal stripes for enhanced night time visibility. Basic pockets and zip front closure for increased functionality.

Radians SV7E Economy Surveyor Type R Class 2 Safety Vest features two Mic Tabs, solid material pockets: one upper open pocket, one upper split pencil pocket, two large deep open inside pockets, and two lower outside pockets. These vests are intended for warm weather situations where workers need enhanced functional pockets.

Radians SV7B Surveyor Type R Class 2 Safety Vest features a black bottom, two Mic Tabs and a zipper closure.  The SV7B has five pockets, including a radio pocket, upper split pocket with pencil pockets, lower front covered pockets and a rear plan pocket.

Radians SV75B Surveyor Type R Class 2 Self-Extinguishing Safety Vest features a black bottom, two Mic Tabs and a zipper closure.  The SV75B has five pockets, including a radio pocket, upper split pocket with pencil pockets, lower front covered pockets and a rear plan pocket. This garment is made from polyester treated to be self-extinguishing as defined by ASTM D6413 (< 2.0s flameout / < 6 char length). This garment should never be used where an arc flash or flash fire hazard is present.

Radians SV7 Surveyor Type R Class 2 Safety Vest features a functional pocket configuration so you can carry the tools you need to do your job. Radio pocket and lower front pockets are covered. Inside pockets are extra deep to prevent tools, phones, or radios from falling out.

The Radians SV6W Two Tone Surveyor Type R Class 2 Women's Safety Vest features a functional pocket configuration, radio pocket, and lower front covered pockets. Inside pockets are extra deep to prevent tools, phones, or radios from falling out, as well as contrasting trim on stripes. Contrasting trim combinations make workers much more noticeable in low light as well as broad daylight. This vest is made to comfortably fit women so that snags are avoided.

Radians SV6H Type R Class 2 Heavy Duty Two Tone Surveyor Safety Vest is a reinforced version of a standard surveyor vest. Reflective material is used for edging to enhance reflective brightness. Multi-function pocket designs, including a clear vinyl credential/badge holder, featuring large inside pockets. Includes a rear D-Ring pass through for use over fall protection.

Class 2 Black Bottom Surveyor Vest. Perfect to be worn in daytime conditions. Contrast trim combination make workers much more noticeable in low light and broad daylight. Very functional pocket configuration so you can carry the tools you need to do your job.

Radians SV65 Type R Class 2 Heavy Duty Contractor Surveyor's vest is built with rugged ANSI 107 high visibility material, reinforced wear points and long-wearing web reinforcements along out edges. The SV65 includes a zipper closer and a large back plan pocket, mesh material for breathability and comfort, and pockets in tough woven twill fabric to provide maximum durability.

The Radians SV63W Two Tone Surveyor Type R Class 3 Vest is a short sleeved hi-vis safety vest perfect to be worn in daytime conditions. Contrast trim combinations make workers much more noticeable in low light and broad daylight. Very functional pocket configuration so you can carry the tools you need to do your job. Class 3 safety vests are designed to protect the worker with maximum visibility. These vests are designed with the most hi-vis material coverage and reflective stripes for workers exposed to complex work environments. Class 3 vests are required in environments with high-speed traffic, high-risk environments and where the worker must be visible through a full range of motions at a minimum of 1280 feet (390 meters). This vest is made to comfortably fit women so that snags are avoided.

The Radians SV63 Two Tone Surveyor Type R Class 3 Vest is a short sleeved hi-vis safety vest perfect to be worn in daytime conditions. Contrast trim combinations make workers much more noticeable in low light and broad daylight. Very functional pocket configuration so you can carry the tools you need to do your job. Class 3 safety vests are designed to protect the worker with maximum visibility. These vests are designed with the most hi-vis material coverage and reflective stripes for workers exposed to complex work environments. Class 3 vests are required in environments with high-speed traffic, high-risk environments and where the worker must be visible through a full range of motions at a minimum of 1280 feet (390 meters).

Radians SV62 Type R Class 2 Surveyor Heavy Duty Safety Vest with Solid Twill Material has reflective stripes on contrasting trim to make workers much more noticeable in low light and broad daylight. Very functional pocket configuration so you can carry the tools you need to do your job. Heavy duty twill material for improved durability.

The Radians SV6-GL Glow-in-the-Dark Safety Vest is perfect for mine workers, construction work that extends past sundown, parking lots, shipyards, cruise ships, or anywhere that there will be limited light needed for reflective tape. Charging the vest for 30 minutes in sunlight will allow the vest to glow-in-the-dark for approximately 8 hours. You can also charge the vest with indoor light, but it will not glow as long as sunlight charging. The phosphorescent glow-in-the-dark tape will charge for up to 15 washes. Custom imprinting available for the left chest pocket and back center.

Radians SV6 Two Tone Surveyor Type R Class 2 Safety Vest has the same features as the SV7 Surveyor safety vest, with the addition of contrasting trim on stripes. Perfect to wear in daytime conditions. Contrast trim combinations make workers much more noticeable in low light and broad daylight.Available in all mesh, as well as solid front and mesh back.

Radians SV6 Two Tone Surveyor Type R Class 2 Safety Vest has the same features as the SV7 Surveyor safety vest, with the addition of contrasting trim on stripes. Perfect to wear in daytime conditions. Contrast trim combinations make workers much more noticeable in low light and broad daylight. Available in all mesh, as well as solid front and mesh back.

This surveyor tether vest takes functionality and convenience to the next level with grommeted pockets, D-rings, and a heavy duty zipper. The grommeted pockets are specially designed to contain retractable tethers within the pocket. You have everything you need to conveniently access and secure tools and accessories, which helps avoid tool drops, which can also be dangerous to others if you’re on scaffolding or ladders.

The Radians SV59Z-3 Type R Class 3 Heavy Duty Surveyor Vest is a Contractor Surveyor's vest with large back plan pocket and zipper closures. Built with rugged ANSI 107 hi-vis material, reinforced wear points, and long-wearing web reinforcement along outer edges. Mesh upper and sleeves, front and back, for breathability and comfort. Pockets in tough woven twill fabric provide maximum durability.

Radians SV59Z Type R Class 2 Heavy Duty Surveyor Safety Vest is a heavy duty contractor Surveyor's vest with zipper closure and large back plan pocket. Built with rugged ANSI 107 hi-vis material, reinforced wear points, and long-wearing web reinforcement along outer edges. Mesh upper, front and back, for breathability and comfort. Pockets in tough woven twill fabric provide maximum durability.

The SV59W ladies vest is a Type R, Class 2 vest that is made to fit and made to last. It features a zipper closure, a large back “plan” pocket, reinforced wear points, and long-wearing web reinforcement along outer edges. Use the cinch located inside the back plan pocket to customize fit. The mesh upper front and back provide breathability and comfort while the tough woven twill fabric used for the pockets enhances durability.

Radians SV59B Type R Class 2 Heavy Duty Surveyor Safety Vest is a heavy duty contractor surveyor’s vest with zipper closure and large back “plan” pocket. Built with rugged ANSI 107 hi-vis material, reinforced wear points, and long-wearing web reinforcement along outer edges. Mesh upper, front and back, for breathability and comfort. Pockets in tough woven twill fabric provide maximum durability.

The Radians SV59-3 Type R Class 3 Heavy Duty Surveyor Vest is a Contractor Surveyor's vest with large back plan pocket. Built with rugged ANSI 107 hi-vis material, reinforced wear points, and long-wearing web reinforcement along outer edges. Mesh upper and sleeves, front and back, for breathability and comfort. Pockets in tough woven twill fabric provide maximum durability.

Radians SV59-2 Type R Class 2 Heavy Duty Surveyor Safety Vest is a heavy duty contractor Surveyor's vest with large back plan pocket. Built with rugged ANSI 107 hi-vis material, reinforced wear points, and long-wearing web reinforcement along outer edges. Mesh upper, front and back, for breathability and comfort. Pockets in tough woven twill fabric provide maximum durability.

Radians SV59-1 Type O Class 1 Heavy Duty Surveyor Safety Vest is a heavy duty contractor Surveyor’s vest with large back “plan” pocket. Built with rugged material, reinforced wear points, and long-wearing web reinforcement along outer edges. Mesh upper, front and back, for breathability and comfort. Pockets in tough woven twill fabric provide maximum durability.

Radians SV55 Type R Class 2 Heavy Duty Two Tone Engineer Safety Vest is intended for professional field engineers and construction superintendents. Rugged Oxford material in front provides resistance to tough working conditions while supporting extra weight in cargo pockets. Reflective material is utilized for reinforcement edge binding further enhancing nighttime visibility, while color blocking keeps you looking clean on the job. Includes numerous multi-function pockets, configured specifically for upside down paint, water bottles and tablets.