PPE

Radians SV75B Surveyor Type R Class 2 Self-Extinguishing Safety Vest features a black bottom, two Mic Tabs and a zipper closure.  The SV75B has five pockets, including a radio pocket, upper split pocket with pencil pockets, lower front covered pockets and a rear plan pocket. This garment is made from polyester treated to be self-extinguishing as defined by ASTM D6413 (< 2.0s flameout / < 6 char length). This garment should never be used where an arc flash or flash fire hazard is present.

Radians SV7E Economy Surveyor Type R Class 2 Safety Vest features two Mic Tabs, solid material pockets: one upper open pocket, one upper split pencil pocket, two large deep open inside pockets, and two lower outside pockets. These vests are intended for warm weather situations where workers need enhanced functional pockets.

Radians SV8 Standard Type R Class 2 Safety Vest is a standard Class 2 safety vest with two horizontal stripes for enhanced night time visibility. Basic pockets and zip front closure for increased functionality.

Radians SV8 Standard Type R Class 2 Safety Vest is a standard Class 2 safety vest with two horizontal stripes for enhanced night time visibility. Basic pockets and zip front closure for increased functionality.

The Radians SV83 is a short sleeved standard Type R Class 3 safety vest for enhanced night time visibility. Basic pockets and zip front closure for increased functionality.Class 3 safety vests are designed to protect the worker with maximum visibility. These vests are designed with the most hi-vis material coverage and reflective stripes for workers exposed to complex work environments. Class 3 vests are required in environments with high-speed traffic, high-risk environments and where the worker must be visible through a full range of motions at a minimum of 1280 feet (390 meters).

The SV92E is a custom, made in the USA, woven modacrylic FR safety vest. Manufactured in our North Carolina facility, the SV92E is available on a build to order basis with a lead time of approximately 2 weeks for orders under 300 pieces.

The SV92E is a custom, made in the USA, woven modacrylic FR safety vest. Manufactured in our North Carolina facility, the SV92E is available on a build to order basis with a lead time of approximately 2 weeks for orders under 300 pieces.

Radians Jersey Knit Modacrylic FR safety vest features a zipper closure with pockets. The vest is intended for situations requiring high visibility and (including but no limited to) FR hazards for which FR material should be and often is required. Typical application would be NFPA 70E work environments; Utilities, Electrical, or Mechanical construction.

Radians Modacrylic FR safety vest is perfect when ultimate safety is required. Not only do these safety vests offer the flame resistant properties required by ANSI 107, but also certified background and reflective material. They are perfect for the Utility Industry or anywhere ultimate safety is required.

The SV97E is a custom, made in the USA, modacrylic mesh FR safety vest. Manufactured in our North Carolina facility, the SV97E is available on a build to order basis with a lead time of approximately 2 weeks for orders under 300 pieces.

Radians Modacrylic FR safety vest is perfect when ultimate safety is required. Not only do these safety vests offer the flame resistant properties required by ANSI 107, but also certified background and reflective material. They are perfect for the Utility Industry, or anywhere ultimate safety is required.

Radians Modacrylic FR safety vest is perfect when ultimate safety is required. Not only do these safety vests offer the flame resistant properties required by ANSI 107, but also certified background and reflective material. They are perfect for the Utility Industry, or anywhere ultimate safety is required.

The Radwear SVE1 provides compliant protection at an economical price and meets ANSI/ISEA 107 standards. The high visibility, 100% polyester mesh material with a zipper closure provides a lightweight, comfortable fit with extra protection in bright and low light environments.

The Radians SW01X-1 High Neck Zip Front X-Back Hooded Sweatshirt features a zipper front closure with snapping storm flap, snapping hand warmer pockets, and a detachable snap-on/off adjustable hood. It is made from high visibility soft knit anti pilling fleece, and has 2 silver reflective tape with contrasting trim. The X-back design offers additional visibility. ANSI/ISEA 107 Type O, Class 1. CSA Z96 Class 1, Level 2.

The Radians SW01X-2 High Neck Zip Front X-Back Hooded Sweatshirt features a zipper front closure with snapping storm flap, snapping hand warmer pockets, and a detachable snap-on/off adjustable hood. It is made from high visibility soft knit anti pilling fleece, and has 2 silver reflective tape with contrasting trim. The X-back design offers additional visibility. ANSI/ISEA 107 Type R, Class 3. CSA Z96 Class 2, Level 2.

The SV97E is a custom, made in the USA, modacrylic mesh FR safety vest. Manufactured in our North Carolina facility, the SV97E is available on a build to order basis with a lead time of approximately 2 weeks for orders under 300 pieces.

When a $300 harness burns because of welding slag, personal safety becomes an issue.- The Radwear® VOLCORE™ Type O, Class 1 AR-FR Rated Vest can be your first line of defense. The VOLCORE™ vest reduces the odds of charing and burned pinholes to your inner layer or harness. Manufactured in our North Carolina facility, the VOLCORE™ is available on a build to order basis with a lead time of approximately 2 weeks for orders under 300 pieces.

This vest is made with a single horizontal stripe, hook and loop front closure, one upper front radio pocket, and two lower pockets. This vest is intended for warm weather, high visibility situations where class 3 vests are required.